有耗介质层上多导体传输线的电磁耦合时域分析方法

目前,针对空间电磁场作用有耗介质层上传输线的电磁耦合,仍缺乏有效的数值分析方法.因此,本文提出一种高效的时域混合算法,很好地解决了有耗介质层上传输线电磁耦合建模难的问题.首先,对经典传输线方程进行改进,推导了适用于有耗介质层上多导体传输线电磁耦合分析的修正传输线方程.然后,结合时域有限差分方法和相应插值技术,求解修正传输线方程,获得多导线及其端接负载上的电压和电流响应,并实现空间电磁场辐射与多导线瞬态响应的同步计算.最后,通过相应计算实例的数值模拟,与CST软件的仿真结果进行对比,验证了时域混合算法的正确性和高效性.     

Wall shear stress modified by bubbles in a horizontal channel flow of silicone oil in the transition region

We performed laboratory experiments on bubbly channel flows using silicone oil, which has a low surface tension and clean interface to bubbles, as a test fluid to evaluate the wall shear stress modification for different regimes of bubble migration status. The channel Reynolds numbers of the flow ranged from 1000 to 5000, covering laminar, transition and turbulent flow regimes. The bubble deformation and swarms were classified as packing, film, foam, dispersed, and stretched states based on visualization of bubbles as a bulk void fraction changed. In the dispersed and film states, the wall shear stress reduced by 9% from that in the single-phase condition; by contrast, the wall shear stress increased in the stretched, packing, and foam states. We carried out statistical analysis of the time-series of the wall shear stress in the transition and turbulent-flow regimes. Variations of the PDF of the shear stress and the higher order moments in the statistic indicated that the injection of bubbles generated pseudo-turbulence in the transition regime and suppressed drag-inducing events in the turbulent regime. Bubble images and measurements of shear stress revealed a correlated wave with a time lag, for which we discuss associated to the bubble dynamics and effective viscosity of the bubble mixture in wall proximity.     

NMR studies on 4‐thio‐5‐furan‐modified and 4‐thio‐5‐thiophene‐modified nucleosides

Systematic NMR characterization of 4‐thio‐5‐furan‐pyrimidine nucleosides or 4‐thio‐5‐thiophene‐pyrimidine nucleosides (ribonucleosides and 2′‐deoxynucleosides) was performed. All proton and carbon signals of 4‐thio‐5‐thiophene‐ribouridine and related analogues were unambiguously assigned. The orientations of the base (4‐thiouridine or its deoxy analogue) relative to the ring (furan or thiophene) are explored by a NMR approach and further supported by X‐ray crystallographic studies. The procedures presented here would be applicable to other modified nucleosides and nucleotides. Copyright © 2016 John Wiley & Sons, Ltd.     

Residual stress in polyethylene pipes

This paper deals with residual stress in polyethylene (PE) pipes as an important factor that influences their lifetime. Residual hoop stress distribution in a PE pipe was determined using a methodology previously carried out by the authors on polypropylene pipes. Axial residual stress magnitude was determined by comparison of experimental data and finite element modelling. Based on the obtained results, a new simplified methodology for determining the residual hoop stress is proposed. The method needs only one circular specimen made of pipe, but, unlike older methods, provides a more precise estimation of residual hoop stress distribution taking into account its exponential shape. Some older results from literature are recalculated using this method and residual hoop stress of various PE pipe grades and dimensions are then compared. To provide an idea of residual hoop stress influence on lifetime of a pipe, a lifetime estimation is carried out for the examined pipe.     

Cold,warm, and hot programming of shape memory polymers

In this article, programming is classified as hot, warm, and cold, based on the temperature zone within which the programming is conducted. The strain and stress locking and releasing mechanisms are discussed within the thermodynamics framework. A new formula is developed for quantifying the strain recovery ratio of cold-programmed SMPs. Stress fixity ratio and stress recovery ratio are also defined based on the understanding of stress locking and recovery mechanisms. State-of-the-art literature on warm and cold programming is reviewed. Well-controlled programming as well as free strain recovery test and constrained stress recovery test are conducted, in order to validate the memory mechanisms discussed in this study. It is found that, while programming temperature has an insignificant effect on the final free shape recovery, it has a significant effect on the stress recovery. The recovery stress programmed by cold programming may be lower, equal to, or higher than that by hot programming, due to the different stress locking mechanisms and other factors such as damage during the thermomechanical cycle. Cold, Warm, and Hot Programming of Shape Memory Polymers © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1319–1339     

Analytic hierarchy process for multi-sensor data fusion based on belief function theory

Multi-sensor data fusion is an evolving technology whereby data from multiple sensor inputs are processed and combined. The data derived from multiple sensors can, however, be uncertain, imperfect, and conflicting. The present study is undertaken to help contribute to the continuous search for viable approaches to overcome the problems associated with data conflict and imperfection. Sensor readings, represented by belief functions, have to be fused according to their corresponding weights. Previous studies have often estimated the weights of sensor readings based on a single criterion. Mono-criteria approaches for the assessment of sensor reading weights are, however, often unreliable and inadequate for the reflection of reality. Accordingly, this work opts for the use of a multi-criteria decision aid. A modified Analytical Hierarchy Process (AHP) that incorporates several criteria is proposed to determine the weights of a sensor reading set. The approach relies on the automation of pairwise comparisons to eliminate subjectivity and reduce inconsistency. It assesses the weight of each sensor reading, and fuses the weighed readings obtained using a modified average combination rule. The efficiency of this approach is evaluated in a target recognition context. Several tests, sensitivity analysis, and comparisons with other approaches available in the literature are described.     

Self‐Assembly of Uranyl–Peroxide Nanocapsules in Basic Peroxidic Environments

A wide range of uranyl–peroxide nanocapsules have been synthesized using very simple reactants in basic media; however, little is known about the process to form these species. We have performed a density functional theory study of the speciation of the uranyl ions under different experimental conditions and explored the formation of dimeric species via a ligand exchange mechanism. We shed some light onto the importance of the excess of peroxide and alkali counterions as a thermodynamic driving force towards the formation of larger uranyl–peroxide species.     

锡苯和铅苯二聚反应的理论研究

采用密度泛函理论B3LYP方法,研究了锡苯和铅苯的[2+2],[4+2]及[4+4]二聚反应的微观机理和势能剖面,考察了Sn(Pb)原子上的2,4,6-三甲基苯基(Mes)取代基对反应势能剖面的影响.研究结果表明,所有反应均为协同过程,且大多数情况下,2个C—Sn(Pb)键同步形成.[2+2]和[4+2]反应在热力学和动力学上均比相应的[4+4]反应容易进行,而[4+2]反应在动力学上比相应的[2+2]反应有利.Sn(Pb)原子上的Mes取代基在热力学和动力学上均不利于反应的进行.铅苯的动力学稳定性与锡苯相当,但其热力学稳定性高于锡苯.     

Stress memory polymers

Like shape memory polymers, a novel phenomenon of stress memory was shown in which the stress of a material can respond to an external stimulus. This concept was further enlightened by a switch‐spring‐frame model that would eliminate the limitation of existing models which overlooked the stimulus responsive nature of such polymers. The discovery being reported in this article was stemmed from a real case study into shape memory polymer fibers in compression stocking for varicose veins. The breakthrough of stress memory enabled researchers to develop applications needing stimuli‐responsive forces, which can broaden the horizon of such smart polymers in emerging smart products in many multidisciplinary fields such as sensors, stress garments, and massage devices, electronic skins, and artificial muscles. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 893–898     

Quantum theory as a description of robust experiments: Derivation of the Pauli equation

It is shown that the Pauli equation and the concept of spin naturally emerge from logical inference applied to experiments on a charged particle under the conditions that (i) space is homogeneous (ii) the observed events are logically independent, and (iii) the observed frequency distributions are robust with respect to small changes in the conditions under which the experiment is carried out. The derivation does not take recourse to concepts of quantum theory and is based on the same principles which have already been shown to lead to e.g. the Schrödinger equation and the probability distributions of pairs of particles in the singlet or triplet state. Application to Stern–Gerlach experiments with chargeless, magnetic particles, provides additional support for the thesis that quantum theory follows from logical inference applied to a well-defined class of experiments.